Advanced Phone Features
71
In the following figure, the phone LCD screen shows an incoming call from 1007 on the
monitored user.
When there is a conversation on the IP phone, you can handle the active call differently
depending on the transfer mode on DSS key.
To configure the transfer mode on DSS key via web user interface:
1.
Click on Phone->Features->Transfer Settings>>.
2.
Select the desired transfer mode from the pull-down list of Transfer Mode via
DSSkey. Depending on your selection:
-
If you select Blind Transfer, press the BLF key to complete the blind transfer to
the monitored phone number.
-
If you select Attended Transfer, press the BLF key to dial out the monitored
phone number and then you can complete the attended or semi-attended
transfer.
-
If you select New Call, press the BLF key to place a new call to the monitored
user.
For more information on performing call transfer, refer to
Call Transfer
on page
60
.
3.
Click Confirm to accept the change.
1.
1006<-1007
Summary of Contents for Yealink SIP-T20P
