15 Precautions for Korean Radio Waves Act
98
YASKAWA
SIEP C730600 84G DeviceNet Technical Manual
A - Braided shield cable
B - Metal panel
C - Cable clamp (conductive)
Figure 14.5 Ground Area
15
Precautions for Korean Radio Waves Act
Figure 15.1 KC Mark
This product confirms to broadcast and communications equipment for business use (Class A) and are designed
for use in locations other than in ordinary houses.
Drives that bear the Korea Certification (KC) mark conform to the Korean Radio Waves Act. Be careful when you
use the drive in Korea under the following conditions.
Table 15.1 Precaution When You Use this Drive
Precautions
This equipment is evaluated for compatibility for use in a business environment and may cause radio interference in a domestic environment.
Note:
The user guide applies only to
“
Business Broadcasting Communication Equipment
”
.
Comply with the EMC Directive to conform to the Korean Radio Act.
16
Specifications
◆
Specifications
Table 16.1 Option Specifications
Items
Specifications
Model
SI-N3
Supported Messages
•
Group 2 Server (UCMM capable).
•
Explicit Messages: Fragmentation is supported. Up to 32 bytes can be input and output.
•
Polled I/O Messages: Fragmentation is not supported. Up to 8 bytes can be input and output.
•
Faulted Node Recovery/Offline Connection Set Messages/Automatic Device Replacement (ADR).
•
Change of State Message (COS). COS can be used as an I/O Input Assembly.
I/O Assembly Instance
Input: 21 types (4 - 8 bytes)
Output: 21 types (4 - 8 bytes)
DeviceNet Specification
Conformance Level 27: Passed
DeviceNet Profile
AC Drive
Input Power
Power Supply Voltage: 11 Vdc - 25 Vdc
Current: 40 mA
Connector Type
5-pin open-style screw connector
Physical Layer Type
Isolated Physical Layer
CAN trans photocoupler
MAC ID Setting
Programmable from drive keypad or network:
MAC ID: 0 - 63
Communications Speed/Baud Rate
Programmable from drive keypad or network:
