YASKAWA
TOEP C730600 0EA Modbus TCP/IP Installation Manual
65
◆
Ring Page
The Ring page shows the status of the RSTP network. RSTP can be enabled and disabled
from this page, and the priority can be modified. To change either of these values, you
must be logged into the page first.
Figure 8.4 Ring Page View
■
RSTP
Ring Protocol
After setting the setting value to [ENABLED], click [Save Changes] to enable RSTP.
Priority
The RSTP Priority controls which bridge in the network becomes the root bridge. For
most installations, the PLC or controller should be configured as the root bridge. A lower
value in the [Priority] field indicates a higher priority. The [Priority] field ranges from 0 to
61440 in increments of 4096. The option defaults to the lowest priority, 61440. Refer to
for information on [Priority] field setting.
Table 8.3 Priority Values
0
16384
32678
49152
4096
20480
36864
53248
8192
24576
40960
57344
12288
28672
45056
61440
To change the priority in [Priority] field, select the desired priority from
and
click [Save Changes].
