5 Installation Procedure
12
YASKAWA EUROPE GMBH
YEU SIEP C710616 86A - AC Drive A1000 Option Powerlink - Technical Manual
Communication Cable Specifications
To ensure proper performance, YASKAWA recommends using Powerlink dedicated Cat5e communication cables.
Network Termination
The Powerlink network does not require a termination resistor if the drive is the last node in the network. Network termination is realized by the
ASIC of the Powerlink option card.
XDD File
For easy network implementation of drives equipped with an Powerlink Option, the XDD file can be obtained from:
Europe: http://www.yaskawa.eu.com
Other areas: contact a YASKAWA representative
Identification of Drive Firmware Version
1. Read out firmware version from drive digital operator.
Check monitor parameter U1-25 when the drive is switched ON. The display shows the last four digits of the firmware version and the value should
be in the range of 1018 ~ 1099.
2. Verifying firmware version on drive nameplate
Figure 5
Figure 5 Verifying firmware version on drive nameplate
PRG : 1018
IND.CONT.EQ.
7J48 B
CIMR-AC2A0021FAA
YASKAWA ELECTRIC CORPORATION
MADE IN JAPAN
:
: AC3PH 200-240V 50/60Hz 24A/18.9A
: AC3PH 0-240V 0-400Hz 21A/17.5A
: 3.5 kg
:
:
: E131457 IP20
PASS
MODEL
MAX APPLI. MOTOR : 5.5kW / 3.7kW REV : A
INPUT
OUTPUT
MASS
O / N
S / N
FILE NO
TYPE 1 ENCLOSURE
AC drive model
Input specifications
Output specifications
Lot number
Serial number
Firmware version
Enclosure type
Normal Duty Amps / Heavy Duty Amps
Summary of Contents for SI-EL3
Page 2: ......