YASKAWA SERVOPACK Sigma 7S Series, Supplementary Manual

Page: 22 / 47

1.2 Forcing the Motor to Stop
1.2.2 Setting the FSTP (Forced Stop Input) Signal
1-13
1
Application Function
s
Pn597
n.

003 Allocate the signal to CN1-3.
After
restart
Setup
n.

004 Allocate the signal to CN1-4.
n.

005 Allocate the signal to CN1-5.
n.

006 Allocate the signal to CN1-6.
n.

007 Allocate the signal to CN1-7.
n.

008 Allocate the signal to CN1-8.
n.

009 Allocate the signal to CN1-9.
n.

010 Allocate the signal to CN1-10.
n.

011 Allocate the signal to CN1-11.
n.

012 Allocate the signal to CN1-12.
n.

013 Allocate the signal to CN1-13.
n.

014 Allocate the signal to CN1-14.
n.0

(default set-
ting)
Set the signal to always enable drive (always disable forc-
ing the motor to stop).
n.1

Enable drive when the input signal is ON (closed).
n.2

Enable drive when the input signal is OFF (open).
n.3

Set the signal to always prohibit drive (always force the
motor to stop).
Parameter Description
When
Enabled
Classifi-
cation