3.1 Monitoring Product Life
3.1.3 Preventative Maintenance
3-4
•
Σ
-7S SERVOPACKs with MECHATROLINK-II Communications References or
Σ
-7S SERVO-
PACKs with MECHATROLINK-III Communications References
•
Σ
-7W SERVOPACKs with MECHATROLINK-III Communications References
Parameter
Description
When
Enabled
Classifi-
cation
Pn514
n.
0
(default setting)
Disabled (the above signal output is not used).
After
restart
Setup
n.
1
Output the signal from the CN1-1 or CN1-2 output ter-
minal.
n.
2
Output the signal from the CN1-23 or CN1-24 output
terminal.
n.
3
Output the signal from the CN1-25 or CN1-26 output
terminal.
Parameter
Description
When
Enabled
Classifi-
cation
Pn514
n.
0
(default setting)
Disabled (the above signal output is not used).
After
restart
Setup
n.
1
Axis A: Output the signal from the CN1-23 or CN1-24
output terminal.
Axis B: Output the signal from the CN1-25 or CN1-26
output terminal.
n.
2
Axis A: Output the signal from the CN1-27 or CN1-28
output terminal.
Axis B: Output the signal from the CN1-29 or CN1-30
output terminal.
Pn597
n.
023
Allocate the signal to CN1-23.
After
restart
Setup
n.
025
Allocate the signal to CN1-25.
n.
027
Allocate the signal to CN1-27.
n.
029
Allocate the signal to CN1-29.
n.
031
Allocate the signal to CN1-31.
n.0
(default setting)
Disabled (the above signal output is not used).
n.1
Output the above signal.
n.2
Invert the above signal and output it.
Summary of Contents for SERVOPACK Sigma 7S Series
Page 1: ......
