3 INSTALLATION
E - 10
3.3
Orientation
Install the SERVOPACK perpendicular to the wall as shown in the figure below.
The SERVOPACK must be orientated as shown in the figure.
Firmly secure the SERVOPACK through two to four mounting holes depending on the SER-
VOPACK capacity.
Ventilation
Mounting face
3.4
Installation Precations
When installing multiple SERVOPACKs side by side in a control panel, observe the following
installation method:
Fan
Fan
30mm (1.2in.) or more
10mm (0.4in.) or more
50mm (2in.) or more
50mm (2in.) or more
J
Front Panel
Install SERVOPACK perpendicular to the wall so that the front panel (digital operator mounted
face) faces outward.
J
Cooling
Provide sufficient space around each SERVOPACK to allow cooling by fan and natural con-
vection.