6 INSPECTION AND MAINTENANCE
E - 16
6
INSPECTION AND MAINTENANCE
This section describes the basic inspections and maintenance for
Σ
-II PLUS Series SERVOPACK.
If any failure occures on SERVOPACK, refer to
Σ
-II PLUS Series SGM
V
H/SGDP User’s Manual
Design and Maintenace Section 9.2 Troubleshooting (SIE-S800-33.12). Contact your YASKAWA
representative if the problem cannot be solved by the procedures described.
WARNING
D
Be sure to turn OFF power before inspection or maintenance.
Otherwise, electric shock may result.
D
Never open the terminal cover while power is ON, and never turn ON power when the terminal
cover is open.
Otherwise, electric shock may result.
D
After turning OFF power, wait at least five minutes before servicing the product.
Otherwise, residual electric charges may result in electric shock.
CAUTION
D
Never change wiring while power is ON.
Failure to observe this caution may result in electric shock or personal injury.
