2.1 Checking Items
E - 7
1
PARTS
Σ
-II PLUS Series SERVOPACK parts names are as follows:
YASKAWA
SERVOPACK
MODE/SET
DATA/
CHARGE
POWER
SGDP
−
200V
C
N
3
C
N
1
C
N
2
L1
L2
1
2
L1C
L2C
B1
B2
U
V
W
Main power
terminal
Indicators
Switch
Operator
connector CN3
I/O signal
connector CN1
Nameplate
Encoder
connector CN2
Heat sink
(side)
Control power
terminal
Motor connection terminal
Grounding
terminal
2
CHECKING ON DELIVERY
CAUTION
D
Use the specified combination of servomotor and SERVOPACK.
Failure to observe this caution may lead to fire or failure.
For more information, refer to
Σ
-
II
PLUS Series SGM
V
H/SGDP User ’s Manual Desgin and Maintenance
Par. 8.2.1.
2.1
Checking Items
When
Σ
-II PLUS Series products are delivered, check the following items:
Check Items
Remarks
Check if the delivered products
are the ones you ordered.
Check the types marked on the nameplates of servomotor and
SERVOPACK (see the next page).
Check if the motor shaft rotates
smoothly.
If the motor shaft is smoothly turned by hand, it is normal. Howev-
er, if the motor has brakes, it cannot be turned manually.
Check for damage.
Check the overall appearance, and check for damage or scratches
resulting from transportation.
Check screws for looseness.
Check for looseness with a screwdriver.
If any of the above items are faulty or incorrect, contact the dealer from which you purchased
the products or your nearest local sales representative.
