6 Installation and Wiring
6.1.2 Installing I/O Modules with Terminal Blocks
6-4
6.1.2
Installing I/O Modules with Terminal Blocks
This section describes the installation and removal procedures for the following I/O
Modules with Terminal Blocks
• I/O Modules with terminal blocks
• Special Purpose Modules with terminal blocks
• M-NET Module
1) Installing the Module on the Mounting Base
Do not remove the connector covers from the Module connectors on the Mounting
Base slots where no Modules are installed.
The presence of any foreign matter in a Module connector may cause the
GL120 and GL130 to malfunction.
Make sure that all mounting screws for the Modules are securely tightened.
Loose screws may cause malfunction of the GL120 and GL130.
Digital Output
Modules
100/200-VAC 8-point Output
Module
JAMSC-120DAO83000
6.1.2 Installing I/O Modules
with Terminal Blocks
100/200-VAC 16-point Output
Module
JAMSC-120DAO84300
12/24-VDC 8-point Output Module JAMSC-120DDO33000
12/24-VDC 16-point Output
Module (sinking)
JAMSC-120DDO34310
12/24-VDC 16-point Output
Module (sourcing)
JAMSC-120DDO34320
Relay Contact 16-point Output
Modules
JAMSC-120DDO35410
12/24-VDC 32-point Output
Module (sinking)
JAMSC-120DDO36410
6.1.3 Installing I/O Modules
with Connectors
12/24-VDC 64-point Output
Module (sinking)
JAMSC-120DRA84300
Analog
Output
Modules
Analog Output Module
(
±
10V, 2 channels)
JAMSC-120AVO01000
6.1.2 Installing I/O Modules
with Terminal Blocks
Analog Output Module
(0 to 10V, 2 channels)
JAMSC-120AVO01100
Analog Output Module
(0 to 5V, 2 channels)
JAMSC-120AVO01200
Analog Output Module
(4 to 20 mA, 2 channels)
JAMSC-120ACO01000
Special
Purpose
Modules
Register Input Module
JAMSC-120RDI34410
6.1.3 Installing I/O Modules
with Connectors
Register Output Module
JAMSC-120RDO34410
Table 6.2 Module Installation and Removal Methods
Product
Name
Model No.
Reference Section
CAUTION
CAUTION
