5 Register I/O Specifications
5.4.3 I/O Allocations
5-24
4) Service Scan Setting
Use the following procedure to set the Register Input/Output Module parameters.
Press the
F4 (Zoom)
Key to access the Parameter Setting Screen (I/O Map Module
Editor).
(1) Move the cursor to
Service scan
and press the
Enter
Key to access the ser-
vice scan setting.
Fig. 5.15 Parameter Setting Screen: Service scan
(2) A screen appears so that the service scan setting can be selected.
Move the cursor to either
Normal
or
High Speed
and press the
Enter
Key to
select the desired scan service.
The MEMOSOFT is set by default to
Normal
.
Fig. 5.16 Service Scan Selection
