YASKAWA MEMOCON GL120, User Manual

Page: 85 / 308

3.2 Digital Output Module Specifications
3-55
3
3.2.8 Relay Contact 16-point Output Module
1) Performance Specifications
Item Specifications
Name Relay Contact 16-point Output Module
Model Name RELAY-16P
Model No. JAMSC-120DRA84300
Co
nt
a
ct S
pecificatio
ns
Rated Voltage/Current 200 VAC, 1 A, resistive load
24 VDC, 1 A, resistive load
Maximum Load Power 750 VA (AC loads)
90W (DC loads)
Maximum Load Voltage 264 VAC/125 VDC
Minimum Load
Voltage/Current 100 mVDC, 0.1 mA
Contact Resistance 100 m
Ω
max.
Contact Life Electrical 3 A at 30 VDC, resistive load: 100,000 operations min.
1 A at 30 VDC, resistive load:
τ
= 7 ms:
τ = 40 ms:
300,000 operations min.
150,000 operations min.
40,000 operations min.
1 A at 120 VAC, cos
φ
= 1.0:
cos
φ
= 0.4:
400,000 operations min.
250,000 operations min.
1 A at 240 VAC, cos
φ
= 1.0:
cos
φ
= 0.4:
300,000 operations min.
200,000 operations min.
Mechanical 20 million operations min.
Output Delay Times OFF to ON: 10 ms max.
ON to OFF: 15 ms max.
Output Type Relay contact outputs
Number of Commons 2
Number of Outputs per Common 8 points/common
Output Power Supply per
Common Connect power supplies of the same phase to the Common 1
and Common 2 for 100/200VAC.
External Connections Removable terminal block with M3 screw terminals
Output Protection Type Unprotected outputs (according to JIS B3502)
Built-in Fuse None
Surge Suppressor None
Other Output Protection None
Number of Outputs 16
Output Signal Indication Indicator for each point; lit when the output is ON.
Status saved in internal logic.
Status Indication ACTIVE: Lights during output processing
Insulation Method Relay
Dielectric Strength 1,500 VAC for 1 min or 1,800 VAC for 1 s between output termi-
nals and internal circuits and between all output commons
Insulation Resistance 100 M Ω min. at room temperature and humidity between output
terminals and ground (measured with a 500-VDC test voltage
megohmmeter).
External Power Supply 100/200 VAC or 24 VDC supplied to drive loads
Derating Conditions None
Internal Current Consumption 610 mA max. at 5 VDC (with all points ON)