72
YASKAWA
TOEPC71061737D GA800 DRIVE INSTALLATION & PRIMARY OPERATION
6.
Push
or
to select
C1-01
, then push
.
7.
Push
or
to select the specified digit, then push
or
to select the correct number.
• Push
(Default) to set the parameter to factory default.
• Push
(Min/Max) to show the minimum value or the maximum value on the display.
8.
Push
to keep the changes.
9.
Continue to change parameters, then push
(Back),
(Home) to go back to the home screen after
you change all the applicable parameters.
◆
Disable the Initial Setup Screen
Do the steps in this procedure to not show the initial start-up screen when the drive is energized.
1.
Push
(Home) to show the HOME screen.
Note:
• When the drive is in HOME Mode, the screen shows [Home] in the upper right-hand corner of the screen.
• If the screen does not show [Home] for
, push
(Back), and then push
to show [Home].
2.
Push
(Menu).
3.
Push
/
to select [Initial Setup], then push
.