166
YASKAWA ELECTRIC
SIEP C710617 05F YASKAWA AC Drive GA700 Technical Manual
2.
Push
(Menu).
3.
Push
or
to select [Monitors], then push
.
4.
Push
or
to select [Trend Plot], then push
.
The screen will show the monitors as shown in this figure.
Note:
Push
(Hold) to switch between Pause and Restart for the monitor display. The
“
Hold (ENTER)
”
message flashes while monitoring
is paused.
◆
Change Parameter Settings
Do the steps in this procedure to set parameters for the application. This example shows how to change the setting
value for
C1-01 [Acceleration Time 1]
.
1.
Push
(Home) to show the HOME screen.
Note:
• When the drive is in HOME Mode, the screen shows [Home] in the upper right-hand corner of the screen.
• If [Home] is not on
, push
(Back).
2.
Push
(Menu).