Yanmar B95W Operating Instructions Manual Download Page 244

Page: 244 / 310

B95W

Operation

242 / 306

07_Bedienung_en.fm - V1.0 - 1.8.17

Actuation of front dozing blade (optional)

Fig. 7-19 Front dozing blade control

Activate the front dozing blade on the display in the machine options menu.

Front dozer
blade lever

Tab. 7-6 Front dozer blade

Float position front dozing blade (optional)

Move the “float position dozing blade” switch to the ON position.

The change is made from lowering the dozing blade to the float position.

Actuation

Effect

Left lever forward

Front dozing blade is lowered.

Left lever back

Front dozing blade is raised.

Notice

When the float position is activated, the dozer blade cannot be operated.

Summary of Contents for B95W























































































































































































































































































































Search results

Summary of Contents for B95W

Reviews:

Related manuals for B95W

Brands by name

Popular brands

Yanmar B95W, Operating Instructions Manual

Search results

Summary of Contents for B95W

Reviews:

Related manuals for B95W

Brands by name

Popular brands