
43
6.
Maintenance Method
Washing of Water Supply Hose Filter
1. After turning off the earth leakage breaker
on this unit, turn the tap off, slide the
sleeve to the direction of the arrow, then,
remove the water supply hose from the
connection port.
2. Remove the plug
②
from ring
①
as
turning.
3. Cleanse filter
⑦
attached to the packing
with water.
4. Wash the filter with spray, etc.
5. Assemble by reversing the procedure.
Replacement of Hose
Be sure to use a hose specified by Yamato Scientific for replacement.
Distilled water tank drain method
1.
Turn OFF the earth leakage breaker of the unit to “OFF.”
2. Take out thr hose in the lower portion on the backside of system.
3. There is a cap at the end of hose. Remove the cap and drain the distilled water tank.
4. When draining is over, be sure to reset the cap firmly. If not firmly provided, the can may
cause water leakage.
Connection Port Body
①
Ring
②
Plug
③
Socket
④
Spacer
⑤
Mounting Screw
⑥
Packing
⑦
Filter
One-touch
Joint
④
⑤
⑥
⑦
①
②
③
Tap
Sleeve
Tap side
Water
Supply
Hose