８
2. Before Using this unit
Requirements for Installation
WARNING!
12. Connection on body side
1. Remove the rubber cap from the
water supply port plug
⑧
.
2. Insert the socket
⑨
securely to
the plug
⑧
on body side with the
sleeve slid in the arrow direction.
The sleeve returns to the original
position when released, and then
connection is completed. The
socket contains a valve inside,
which opens only when the socket
is connected by plug; otherwise,
water is not fed because this valve
does not open.
Body side
13. Connect the water supply hose to the tap provided with sink equipment
If the water supply hose is
connected to a tap without sink
equipment, flood damage may be
caused when water supply hose is
disconnected or damaged; therefore
be sure to connect to a tap having
sink equipment.
14. When the sink equipment is remote from water tap, use "Water Supply Port Unit"
(optional accessory)
"Water Supply Port Unit" is designed to loosen the connection to the tap harder than the set
of standard water supply hoses when water pressure fluctuates.
15. In case that there is no tap, use appropriate joint shown in the optional "Coupler
joints for feed water".
Tap
Water supply
hose
Socket on
connection
port side
Connection port Body
Sink
Sleeve
⑨
⑧