２５
４.
Operation Method
Sampling of Pure Water
Continuous collection of pure water
FILL
CONDUCTIVITY
M
F
WATER
LEVEL
MEASURED
CONTINUOUS
FULL
EMPTY
POWER
PURE
WATER
DISTILLED
WATER
DI sampling
DIS-Conductivity
0.06×10
-4
S/m
Continuous
DI sampling
DIH-Conductivity
0.06×10
-4
S/m
Continuous
During distillation or when the distilled water
tank is full, pressing the PURE WATER key
while
“CONTINUOUS” of the sampling selector
lamp is ON causes the pure water lamp goes
ON, enabling sampling of the pure water.
（
If distillation is being made, the distillation
operation is stopped temporarily.
）
Collecting
water
stops
by
pressing
PURE WATER key again. Then, PURE
WATER lamp is turned on. After water
collection is finished, it returns to distillation
operation.
Continuous collection of distilled water
FILL
CONDUCTIVITY
M
F
WATER
LEVEL
MEASURED
CONTINUOUS
FULL
EMPTY
POWER
PURE
WATER
DISTILLED
WATER
DI sampling
DIS-Conductivity
0.06×10
-4
S/m
Continuous
DW sampling
DW-Conductivity
0.854×10
-4
S/m
Continuous
While the distilled water tank level LED is ON in
green and when
“CONTINUOS” of the
sampling selector lamp is ON, pressing the
DISTILLED WATER key causes the distilled
water lamp to go ON, enabling sampling of the
distilled water.
To
stop
sampling,
press
the
DISTILLED WATER key again, and the
distilled water lamp goes OFF.
During sampling of distilled water, distillation is
continued.
Sampling is possible till the distilled water tank
level LED goes ON in red.