Yamato WG270 Instruction Manual Download Page 42 | Manualshive

Page: 42 / 71

Yamato WG270 Instruction Manual Download Page 42

３８

６.

Maintenance Method

Washing of Distiller



Dismounting of Distiller

1. Turn "OFF" the earth leakage breaker of the unit.

2. Close the tap.

3. Check that the boiler is not hot (longer than 30 minutes after the breaker is turned "OFF"), then

open the front door of the unit, and open the boiler water drain cock.

4. Disconnect the hose connected to the boiler

①

and condenser

②

. In disconnecting from the

distilled water outlet and boiler water supply and drain port, turn the hose band by use of tool
and displace the engaged portion (serrated portion). Take care in disconnecting because
excessive force applied to glass may cause damage.

②

①

5. Disconnect the hole plug at left plate, remove four screws with a screw driver, then remove the

left plate.

6. Loosen 4 screws on the right of terminal block located at the right top of the body frame with left

side plate dismounted by use of Phillips screwdriver, and disconnect the heater lead terminal.

Cooling
water outlet

Cooling water inlet

Distilled
water outlet

Boiler water supply
and drain port

«
...
40
41
42
43
44
...
»

Summary of Contents for WG270








































































Reviews:

No comments