Yamato WA Series, Instruction Manual

Page: 10 / 53

Wall mount must be capable of supporting a minimum weight of 50 lbs. (22.7 kg). The
wall mount bracket has holes on 16” centers to be secured to studs. If studs are not
available, a plywood sheet mounted to the wall is recommended. Make sure holes are
level.
•
Mount bracket with small slots in tabs pointing up.
•
Align slots in system back plate with tabs on mounting bracket. Insert tabs into slots
and slowly lower system. Ensure all tabs are fully engaged and base of system is
parallel to floor.
•
To lock unit to the bracket, insert rubber bushing with screw and washer (provided)
into frame as shown. Tighten screw to lock wall bracket to frame
8
INSTALLATION
SYSTEM WALL MOUNT INSTRUCTION
Tabs pointing up
Wall mount bracket
Insert bushing assembly here to lock system to bracket.