Yamato WA Series, Instruction Manual

Page: 19 / 53

Polishing Cartridge Installation
1. Remove plastic plugs from the top of the cartridge pack
2. Open the right white door and lift the lever on the right side of the mechanism.
3. Insert the cartridge with connections facing into the system. Label should be
facing out. Flanges on the side of the cartridge will rest on the alignment guide.
Alignment guide
4. Push cartridge towards system until it stops.
5. Slowly lower the lever to secure the cartridge. The cartridge will be drawn into the
final position.
6. Make sure the lever is in its fully down and locked position.
17
COMMISSIONING AND START UP