5 - 62
CHAS
REAR SHOCK ABSORBER
EC585000
ASSEMBLY AND INSTALLATION
EC585300
Bearing
1. Install:
●
Upper bearing
1
NOTE:
Install the bearing parallel until the stopper ring
groove appears by pressing its outer race.
ACHTUNG:
CAUTION:
Do not apply the grease on the bearing
outer race because it will wear the rear
shock absorber surface on which the bear-
ing is press fitted.
2. Install:
●
Stopper ring (upper bearing)
1
NOTE:
After installing the stopper ring, push back the
bearing until it contacts the stopper ring.
3. Install:
●
Lower bearing
1
NOTE:
Install the bearing by pressing it on the side
having the manufacture’s marks or numbers.
Installed depth of the bearing
a
:
4 mm (0.16 in)
Spring (rear shock absorber)
1. Install:
●
Spring
1
●
Upper spring guide
2
●
Lower spring guide
3
