4 - 80
ENG
CDI MAGNETO
EC4L5000
ASSEMBLY AND INSTALLATION
CDI magneto
1. Install:
●
Stator
1
●
Screw (stator)
2
NOTE:
●
Apply the sealant on the grommet of the CDI
magneto lead.
●
Tighten the screws using the T30 bit.
Quick gasket
®
:
ACC-QUICK-GS-KT
YAMAHA Bond No. 1215:
90890-85505
T
R
.
.
10 Nm (1.0 m · kg, 7.2 ft · lb)
2. Install:
●
Woodruff key
1
●
Rotor
2
NOTE:
●
Clean the tapered portions of the crankshaft
and rotor.
●
When installing the woodruff key, make sure
that its flat surface
a
is in parallel with the
crankshaft center line
b
.
●
When installing the rotor, align the keyway
c
of the rotor with the woodruff key.
3. Install:
●
Washer
1
●
Nut (rotor)
2
Use the rotor holding tool
3
.
Rotor holding tool:
YU-1235/90890-01235
T
R
.
.
48 Nm (4.8 m · kg, 35 ft · lb)
