Yamaha XJR1300(L) 99, Service Manual

Page: 220 / 338

6-6
CHAS
FRONT WHEEL AND BRAKE DISCS
NOTE:
NOTE:
NOTE:
CAUTION:
EAS00544
INSTALLING THE FRONT WHEEL
The following procedure applies to both brake
discs.
1. Lubricate:
wheel axle
oil seal lips
Recommended lubricant
Lithium soap base grease
2. Install:
brake disc 1
Apply LOCTITE

648 to the threads of the
brake disc bolts.
Tighten the brake disc bolts in stages and in a
crisscross pattern.
3. Install:
speedometer gear unit
Make sure that the speedometer gear unit and
the wheel hub are installed with the two projec-
tions
a
meshed into the two slots b respec-
tively.
4. Install:
front wheel
Make sure that the slot
a
in the speedometer
gear unit fits over the stopper b on the outer
tube.
5. Tighten:
wheel axle 1
wheel axle pinch bolt 2
Wheel axle
73 Nm (7.3 m kg)
Wheel axle pinch bolt
19 Nm (1.9 m kg)
Before tightening the wheel axle nut, push
down hard on the handlebar several times
and check if the front fork rebounds
smoothly.