Yamaha XJR1300(L) 99, Service Manual

Page: 167 / 338

4-55
ENG
OIL PUMP
NOTE:
CAUTION:
NOTE:
EAS00375
ASSEMBLING THE OIL PUMP
1. Lubricate:
inner rotor
outer rotor
oil pump shaft
(with the recommended lubricant)
Recommended lubricant
Engine oil
2. Install:
oil pump shaft 1
(to the oil pump cover 2 )
pin 3
inner rotor 4
outer rotor 5
pin 6
oil pump housing 7
screw
Oil pump housing screw
10 Nm (1.0 m kg)
When installing the inner rotor, align the pin 3
in the oil pump shaft with the groove on the inner
rotor
4 .
3. Check:
oil pump operation
Refer to “CHECKING THE OIL PUMP”.
EAS00376
INSTALLING THE OIL PUMP
1. Install:
oil pump 1
Oil pump bolt
10 Nm (1.0 m kg)
After tightening the bolts, make sure that the
oil pump turns smoothly.
Align the arrow
a
on the oil pump with the arrow
b on the crankcase.