Yamaha XJR1300(L) 99, Service Manual

Page: 77 / 338

3-19
MEASURING THE ENGINE OIL PRESSURE/
ADJUSTING THE CLUTCH LEVER
CHK
ADJ
NOTE:
b
a
a c
WARNING
Engine oil pressure
80 kPa (0.8 kg / cm
2
, 0.8 bar)
Engine speed
Approx. 1000 r / min
Engine oil temperature
70 80
_
C (158 176
_
F)
Out of specification Adjust.
Engine oil pressure Possible causes
Below specification
Faulty oil pump
Clogged oil filter
Leaking oil passage
Broken or damaged
oil seal
Above specification
Leaking oil passage
Faulty oil filter
Oil viscosity too high
6. Install:
S
main gallery bolt
Main gallery bolt
12 Nm (1.2 m
S
kg)
EAS00082
ADJUSTING THE CLUTCH LEVER
1. Adjust:
S
clutch lever position
(distance
a
from the handlebar grip to the
clutch lever)
a. While pushing the clutch lever forward, turn
the adjusting dial
1
until the clutch lever is in
the desired position.
Be sure to align the setting on the adjusting dial
with the arrow mark
2 on the clutch lever hold-
er.
Position #1 Distance is the larg-
est
Position #4 Distance is the small-
est
After adjusting the clutch lever position,
make sure that the pin on the clutch lever
holder is firmly inserted in the hole in the ad-
justing dial.