Yamaha XJR1300(L) 99, Service Manual

Page: 221 / 338

6-7
CHAS
FRONT WHEEL AND BRAKE DISCS
WARNING
NOTE:
NOTE:
6. Install:
brake caliper
Brake caliper bolt
40 Nm (4.0 m kg)
Make sure that the brake hose is routed
properly.
EAS00549
ADJUSTING THE FRONT WHEEL STATIC
BALANCE
After replacing the tire, wheel or both, the front
wheel static balance should be adjusted.
Adjust the front wheel static balance with the
brake discs installed.
1. Remove:
balancing weight(-s)
Place the front wheel on a suitable balancing
stand.
2. Find:
front wheel’s heavy spot
a. Spin the front wheel.
b. When the front wheel stops, put an “X
1
” mark
at the bottom of the wheel.
c. Turn the front wheel 90 so that the “X
1
” mark
is positioned as shown.
d. Release the front wheel.
e. When the wheel stops, put an “X
2
” mark at
the bottom of the wheel.
f. Repeat steps (b) through (d) several times
until all the marks come to rest at the same
spot.
g. The spot where all the marks come to rest is
the front wheel’s heavy spot “X”.