Yamaha XJR1300(L) 99, Service Manual

Page: 199 / 338

4-87
ENG
TRANSMISSION
NOTE:
NOTE:
2. Measure:
drive axle runout
(with a centering device and dial gauge
1 )
Out of specification Replace the drive
axle.
Drive axle runout limit
0.06 mm
3. Check:
transmission gears
Blue discoloration / pitting / wear
Replace
the defective gear(-s).
transmission gear dogs
Cracks / damage / rounded edges
Replace
the defective gear(-s).
4. Check:
transmission gear engagement
(each pinion gear to its respective wheel
gear)
Incorrect
Reassemble the transmission
axle assemblies.
When reassembling the main axle, press the
2nd pinion gear
1 onto it 2 as shown.
5. Check:
transmission gear movement
Rough movement
Replace the defective
part(-s).
6. Check:
circlips
Damage / bends / looseness
Replace.
EAS00426
INSTALLING THE SHIFT FORKS AND SHIFT
DRUM ASSEMBLY
1. Install:
shift drum aseembly 1
shift fork guide bars 2
shift fork “R” 3
shift fork “C” 4
shift fork “L” 5
The embossed marks on the shift forks should
face towards the right side of the engine and be
in the following sequence: “R”, “C”, “L”.