Yamaha Wolverine YX70EPNG, Service Manual

Page: 54 / 503

TIGHTENING TORQUES
2-21
Parking brake cable adjusting lock-
nut
M6 1 16 Nm (1.6 m·kgf, 12 ft·lbf)
Differential assembly nut M12 1 105 Nm (10.5 m·kgf, 76 ft·lbf)
Differential assembly bolt M10 2 60 Nm (6.0 m·kgf, 43 ft·lbf)
Differential assembly nut M10 1 60 Nm (6.0 m·kgf, 43 ft·lbf)
Differential gear oil filler bolt M14 1 23 Nm (2.3 m·kgf, 17 ft·lbf)
Differential gear oil drain bolt M10 1 10 Nm (1.0 m·kgf, 7.2 ft·lbf)
Differential motor bolt M6 3 11 Nm (1.1 m·kgf, 8.0 ft·lbf)
Front drive shaft yoke nut M14 1 62 Nm (6.2 m·kgf, 45 ft·lbf)
Differential case bolt M8 5 24 Nm (2.4 m·kgf, 17 ft·lbf)
Support bearing bracket bolt M8 2 18 Nm (1.8 m·kgf, 13 ft·lbf)
Front drive shaft universal joint yoke
nut
M16 1 150 Nm (15 m·kgf, 108 ft·lbf)
Final drive assembly nut (upper side) M12 2 105 Nm (10.5 m·kgf, 76 ft·lbf)
Final drive assembly bracket bolt
(upper side)
M8 4 33 Nm (3.3 m·kgf, 24 ft·lbf)
Final drive assembly nut (lower side) M12 1 105 Nm (10.5 m·kgf, 76 ft·lbf)
Final drive assembly bracket bolt
(lower side)
M8 2 33 Nm (3.3 m·kgf, 24 ft·lbf)
Final gear oil filler bolt M10 1 23 Nm (2.3 m·kgf, 17 ft·lbf)
Final gear oil drain bolt M10 1 23 Nm (2.3 m·kgf, 17 ft·lbf)
Final drive case cover bolt M8 10 28 Nm (2.8 m·kgf, 20 ft·lbf)
Ring gear bearing housing bolt M10 8 52 Nm (5.2 m·kgf, 38 ft·lbf)
Final drive pinion gear bearing hous-
ing bolt
M8 4 28 Nm (2.8 m·kgf, 20 ft·lbf)
Ring gear stopper nut M8 1 16 Nm (1.6 m·kgf, 12 ft·lbf)
Rear drive shaft coupling gear nut
(final drive assembly side)
M14 1 97 Nm (9.7 m·kgf, 70 ft·lbf)
Main switch nut — 1 1.3 Nm (0.13 m·kgf, 0.94 ft·lbf)
Meter assembly nut M5 3 3.8 Nm (0.38 m·kgf, 2.8 ft·lbf)
Starter relay lead bolt M6 2 3.6 Nm (0.36 m·kgf, 2.6 ft·lbf)
ECU nut M6 1 7 Nm (0.7 m·kgf, 5.1 ft·lbf)
Lean angle sensor bolt M5 2 3.8 Nm (0.38 m·kgf, 2.8 ft·lbf)
Positive battery lead nut M8 1 1.5 Nm (0.15 m·kgf, 1.1 ft·lbf)
Negative battery lead nut M8 1 1.5 Nm (0.15 m·kgf, 1.1 ft·lbf)
EPS control unit bolt (for EPS mod-
els)
M6 1 2.5 Nm (0.25 m·kgf, 1.8 ft·lbf)
Intake air temperature sensor screw M5 1 1.5 Nm (0.15 m·kgf, 1.1 ft·lbf)
Ignition coil bolt M6 2 7 Nm (0.7 m·kgf, 5.1 ft·lbf)
Rectifier/regulator bolt M6 2 7 Nm (0.7 m·kgf, 5.1 ft·lbf)
Parking brake buzzer bolt M5 1 7 Nm (0.7 m·kgf, 5.1 ft·lbf)
Tail/brake light nut M6 4 7 Nm (0.7 m·kgf, 5.1 ft·lbf)
Item
Thread
size
Q’ty Tightening torque Remarks
LT
LT
LT
LT