Yamaha Wolverine YX70EPNG, Service Manual

Page: 47 / 503

TIGHTENING TORQUES
2-14
TIP
Breather plate cover bolt
Tighten the breather plate cover bolts to 10 Nm (1.0 m·kgf, 7.2 f·lbf) in the proper tightening sequence.
TIP
Camshaft cap bolt
Tighten the camshaft cap bolts to 10 Nm (1.0 m·kgf, 7.2 f·lbf) in the proper tightening sequence.
Front drive shaft coupling gear nut
(middle gear side)
M16 1 190 Nm (19 m·kgf, 137 ft·lbf)
Middle driven shaft bearing retainer M55 1 80 Nm (8.0 m·kgf, 58 ft·lbf)
Left-hand
threads
Middle driven pinion gear bearing
housing bolt
M8 4 25 Nm (2.5 m·kgf, 18 ft·lbf)
Middle driven pinion gear bearing re-
tainer
M60 1 130 Nm (13 m·kgf, 94 ft·lbf)
Left-hand
threads
Rear drive shaft coupling gear nut
(middle gear side)
M16 1 190 Nm (19 m·kgf, 137 ft·lbf)
Starter motor bolt M6 2 10 Nm (1.0 m·kgf, 7.2 ft·lbf)
Starter motor cover bolt M5 2 4.9 Nm (0.49 m·kgf, 3.5 ft·lbf)
Brush set bolt M6 1 11 Nm (1.1 m·kgf, 8.0 ft·lbf)
Starter motor lead nut M6 1 4.9 Nm (0.49 m·kgf, 3.5 ft·lbf)
Engine ground lead bolt M6 1 10 Nm (1.0 m·kgf, 7.2 ft·lbf)
Spark plug M10 1 11 Nm (1.1 m·kgf, 8.0 ft·lbf)
Stator coil assembly bolt M6 3 10 Nm (1.0 m·kgf, 7.2 ft·lbf)
Throttle position sensor screw M5 2 3.5 Nm (0.35 m·kgf, 2.5 ft·lbf)
Intake air pressure sensor screw M5 1 3.6 Nm (0.36 m·kgf, 2.6 ft·lbf)
Crankshaft position sensor bolt M5 2 3.0 Nm (0.30 m·kgf, 2.2 ft·lbf)
Coolant temperature sensor M12 1 20 Nm (2.0 m·kgf, 14 ft·lbf)
Gear position switch bolt M6 2 7 Nm (0.7 m·kgf, 5.1 ft·lbf)
Reverse switch M10 1 17 Nm (1.7 m·kgf, 12 ft·lbf)
Speed sensor bolt M6 1 10 Nm (1.0 m·kgf, 7.2 ft·lbf)
Item
Thread
size
Q’ty Tightening torque Remarks
LT
LT
LT
LT
LT
LT
3
2
1
4