Yamaha VK540EF, Service Manual, Page: 284 / 439

5-22
CDI MAGNETO
ENG
NOTE:
NOTE:
NOTE:
CAUTION:
NOTE:
ESS00172
INSTALLATION
After installing all parts, refer to “CABLE ROUT-
ING” in CHAPTER 8, to check the cable, lead
and hose routings.
1. Pass the magneto leads 1 throught the
hole, and install the grommet 2 to the crank-
case.
2. Install:
S
Stator assembly 3
Align the timing mark (
"
) 4 on the stator plate
with the seam line 5 of the crankcase.
3. Install:
S
Woodruff key 1
S
CDI magneto 2
When installing the CDI magneto, make sure
the woodruff key is properly seated in the key
way of the crankshaft. Apply a light coating of
lighium soap base grease to the tapered portion
of the crankshaft end.
Be sure to remove any oil or grease from the
tapered portion of the crankshaft using a
cloth dampened with thinner.
4. Tighten:
S
Nut
1
(CDI magneto)
Attach the universal rotor holder 2 to hold the
CDI magneto.
Universal rotor holder:
90890-01235, YU-01235
Nut (CDI magneto):
85 Nm (8.5 m
S
kg, 61 ft
S
lb)