Operation
66
2. Push the “
” (up) side of the power trim
and tilt switch to fully tilt the outboard
motor up.
3. If you have the tilt support shaft, install
the tilt support shaft. For information on
installing the tilt support shaft, see page
34.
4. Once the outboard motor is supported
with the tilt support shaft, push the “
”
(down) side of the power trim and tilt
switch to retract the trim rods.
NOTICE:
Make sure that the trim rods retracts
completely during mooring. This pro-
tects the rods from marine growth
and corrosion, which could damage
the power trim and tilt mechanism.
[ECM00253]
1. Power trim and tilt switch
ZMU07034
N
ZMU06926
N
1
UP
ZMU06937
1. Power trim and tilt switch
1. Tilt support shaft
ZMU069
8
6
1
UP
1
ZMU06997
6CB-9-3B-1E0.book 66 ページ 2017年11月16日 木曜日 午後5時29分
©
2019 Yamaha Motor Corporation, U.S.A.