background image

 

 

 

http://www.TYAN.com 

 

 

 

Tomcat K7M 

///

S2498 

Revision 1.02

 

 

 

Copyright © TYAN Computer Corporation, 2005-2006. All rights reserved. No part of this manual 
may be reproduced or translated without prior written consent from TYAN Computer Corp. 
 
All registered and unregistered trademarks and company names contained in this manual are the 
properties of their respective owners, including, but not limited to the following. 
 
TYAN, Tomcat K7M S2498 are trademarks of TYAN Computer Corporation. 
AMD, Geode and the combinations thereof are trademarks of AMD Corporation. 
Award BIOS is a trademark of Phoenix Technology. 
Microsoft, Windows are trademarks of Microsoft Corporation. 
IBM, PC, AT, PS/2 are trademarks of IBM Corporation. 
Realtek is a trademark of Realtek Semiconductor Corporation.   
Winbond is a trademark of Winbond Electronics Corporation. 
  
Information contained in this document is provided by TYAN Computer Corporation and which has 
been reviewed for accuracy and reliability before printing, however, TYAN assumes no liability and 
disclaims any express or implied warranty relating to sale and/or use of TYAN products including 
liability or warranties relating to fitness for a particular purpose or merchantability.  
 
TYAN retains the right to make changes to product descriptions and/or specifications at any time, 
without notice. In no event will TYAN be held liable for any direct or indirect, incidental or 
consequential damage, loss of use, loss of data or other malady resulting from errors or 
inaccuracies of information contained in this document.

 

 
 
 
 
 

Summary of Contents for S2498































































Reviews: