Operation
67
Tilting up when using the tilt support lever
1. Move the remote control lever to the
neutral position.
2. Push the “
” (up) side of the power trim
and tilt switch to fully tilt the outboard
motor up.
3. Pull the tilt support lever toward you to
support the engine.
WARNING! After
tilting the outboard motor, be sure to
support it with the tilt support knob or
tilt support lever. Otherwise the out-
board motor could fall back down
suddenly if oil in the power trim and
tilt unit or in the power tilt unit loses
pressure.
[EWM00263]
NOTICE:
Do not use
the tilt support lever or knob when
trailering the boat. The outboard mo-
tor could shake loose from the tilt
support and fall. If the motor cannot
be trailered in the normal running po-
sition, use an additional support de-
vice to secure it in the tilt position.
For more detailed information, see
1. Trim rods
1
ZMU06924
ZMU07034
N
ZMU06926
N
1. Power trim and tilt switch
1. Power trim and tilt switch
1
UP
ZMU06937
ZMU069
8
6
1
UP
6CB-9-3B-1E0.book 67 ページ ２０１７年１１月１６日 木曜日 午後５時２９分
©
2019 Yamaha Motor Corporation, U.S.A.
