3 - 27
INSP
ADJ
FUSE INSPECTION (TT-R90E)
6. Install:
●
Battery
7. Check:
●
Battery terminals
Dirt
→
Clean with a wire brush.
Loose connection
→
Connect properly.
8. Lubricate:
●
Battery terminal
9. Connect:
●
Battery lead coupler
(to the battery terminals)
10. Install:
●
Rear fender
●
Seat
Recommended lubricant:
Lithium soap base grease
FUSE INSPECTION (TT-R90E)
CAUTION:
To avoid a short circuit, always set the
main switch to “OFF” when checking or
replacing a fuse.
1. Remove:
●
Seat
●
Rear fender
2. Check:
●
Continuity
2
Reserve fuse
Checking steps:
●
Remove the fuse
1
.
●
Connect the pocket tester to the fuse and
check the continuity.
NOTE:
Set the pocket tester selector to “
Ω
×
1”.
Pocket tester:
YU-03112-C/90890-03112
●
If the pocket tester indicates “
∞
”, replace
the fuse.
1
2
Summary of Contents for TT-R90(S)
