Yamaha TMAX XP530E-A 2017, Service Manual

Page: 156 / 676

PERIODIC MAINTENANCE
3-28
4. Drain:
•
Engine oil
(completely from the crankcase)
5. If the oil filter cartridge is also to be replaced,
perform the following procedure.
▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼
a. Remove the oil filter cartridge “1” with an oil
filter wrench “2”.
b. Lubricate the O-ring “3” of the new oil filter
cartridge with a thin coat of lithium-soap-
based grease.
NOTICE
ECA13390
Make sure the O-ring “3” is positioned cor-
rectly in the groove of the oil filter cartridge.
c. Tighten the new oil filter cartridge to specifi-
cation with an oil filter wrench.
▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲
6. Install:
• Gasket
•
Engine oil drain bolt
(along with the O-ring)
TIP
Lubricate the O-ring of the engine oil drain bolt
with a thin coat of lithium-soap-based grease.
7. Fill:
• Crankcase
(with the specified amount of the recom-
mended engine oil)
8. Install:
• Engine oil filler cap
(along with the O-ring
)
9. Start the engine, warm it up for several min-
utes, and then turn it off.
10.Check:
•
Engine
(for engine oil leaks)
11.Check:
• Engine oil level
Refer to “CHECKING THE ENGINE OIL
LEVEL” on page 3-27.
12.Check:
• Engine oil pressure
▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼
a. Remove the bottom side cowling and bottom
center cowling.
Refer to “GENERAL CHASSIS (2)” on page
4-11.
b. Slightly loosen the oil check bolt “1”.
Oil filter wrench
90890-01426
Oil filter wrench
YU-38411
2
3
2
1
3
Oil filter cartridge
17 N·m (1.7 kgf·m, 13 lb·ft)
Engine oil drain bolt
43 N·m (4.3 kgf·m, 32 lb·ft)
Engine oil quantity
Quantity (disassembled)
3.50 L (3.70 US qt, 3.08 Imp.qt)
Oil change
2.60 L (2.75 US qt, 2.29 Imp.qt)
With oil filter removal
2.90 L (3.07 US qt, 2.55 Imp.qt)
T
R
.
.
New
T
R
.
.
New