Yamaha TMAX XP530E-A 2017, Service Manual

Page: 656 / 676

SELF-DIAGNOSTIC FUNCTION AND DIAGNOSTIC CODE TABLE
(ECU)
9-13
09 Fuel system voltage
(battery voltage)
Fuel system voltage
Approximately 12.0
Set the engine stop switch to
“ ”, and then compare the
actually measured battery
voltage with the tool display
value. (If the actually mea-
sured battery voltage is low,
recharge the battery.)
13 Throttle position sensor sig-
nal 2
• Fully closed position 8–22 Check with throttle valves
fully closed.
• Fully open position 92–108 Check with throttle valves
fully open.
14 Accelerator position sensor
signal 1
• Fully closed position 11–20 Check with throttle grip fully
closed position.
• Fully open position 95–106 Check with throttle grip fully
open position.
15 Accelerator position sensor
signal 2
• Fully closed position 9–23 Check with throttle grip fully
closed position.
• Fully open position 93–109 Check with throttle grip fully
open position.
16 Front wheel vehicle speed
pulses
Front wheel speed pulse
0–999
Check that the number
increases when the front
wheel is rotated. The number
is cumulative and does not
reset each time the wheel is
stopped.
20 Sidestand switch Extend and retract the sides-
tand (with the transmission in
gear).
• Sidestand retracted ON
• Sidestand extended OFF
Diagnostic
code No.
Item Meter display Procedure