Yamaha TMAX XP530E-A 2017, Service Manual

Page: 15 / 676

FEATURES
1-6
Deactivating the cruise control system
Perform one of the following operations to cancel the set cruising speed. The “SET” indicator light will
go off.
•
Turn the throttle grip past the closed position in the deceleration direction.
•
Apply the front or rear brake.
TIP
Traveling speed decreases as soon as the cruise control system is deactivated; unless the throttle grip
is turned.
Using the resume function
Push the “RES+” side of the cruise control setting switch to reactivate the cruise control system. The
traveling speed will return to the previously set cruising speed. The “SET” indicator light will come on.
WARNING
EWA17460
It is dangerous to use the resume function when the previously set cruising speed is too high
for current conditions.
Turning off the cruise control system
Push the cruise control power switch “ ” to turn off the cruise control system. The “ ” indicator light
and the “SET” indicator light will turn off.
TIP
Whenever the cruise control system or the vehicle power is turned off, the previously set cruising speed
is erased. You will not be able to use the resume function until a new cruising speed has been set.
Automatic deactivation of the cruise control system
The cruise control system is electronically controlled and linked with other control systems. The cruise
control system will automatically deactivate under the following conditions:
•
The cruise control system is not able to maintain the set cruising speed (such as when going up a
steep hill).
•
Wheel slip or wheel spin is detected. (If the traction control system is on, traction control will engage.)
• Engine trouble, etc.
If the cruise control system is automatically deactivated, the “ ” indicator light will turn off and the “SET”
indicator light will flash for 4 seconds.
If the cruise control system was automatically deactivated, please stop and confirm that your vehicle is
in good operating condition before continuing on.
When traveling on roads with steep grades, the cruise control system may not be able to maintain the
set cruising speed.
•
When going uphill, the actual traveling speed may become lower than the set cruising speed. If this
occurs, accelerate to the desired traveling speed using the throttle.
•
When going downhill, the actual traveling speed may become higher than the set cruising speed. If
this occurs, the setting switch cannot be used to adjust the set cruising speed. To reduce the traveling
speed, apply the brakes. When the brakes are applied, the cruise control system will deactivate.
MO
DE
a
b
a. Closed position b. Cruise control cancel direction