Yamaha TMAX XP530E-A 2017, Service Manual

Page: 52 / 676

ENGINE SPECIFICATIONS
2-5
Clutch plate 1 thickness 1.30–1.50 mm (0.051–0.059 in)
Plate quantity 5 pcs
Warpage limit 0.10 mm (0.004 in)
Clutch plate 2 thickness 1.80–2.00 mm (0.071–0.079 in)
Plate quantity 2 pcs
Warpage limit 0.20 mm (0.008 in)
Clutch spring free length 31.90 mm (1.26 in)
Limit 24.80 mm (0.98 in)
Spring quantity 6 pcs
Clutch damper spring height 3.50 mm (0.14 in)
Minimum height 3.10 mm (0.12 in)
Spring quantity 7 pcs
Clutch spring plate height 4.70 mm (0.19 in)
Minimum height 4.40 mm (0.17 in)
Spring quantity 1 pcs
Clutch-in revolution 1650–2250 r/min
Clutch-stall revolution 3800–4800 r/min
V-belt
V-belt width 32.9 mm (1.30 in)
Limit 31.4 mm (1.24 in)
Drivetrain
Primary reduction ratio 1.000
Transmission type V-belt automatic
Transmission ratio 2.041–0.758 : 1
Weight outside diameter 25.0 mm (0.98 in)
Limit 24.5 mm (0.96 in)
Main axle runout limit 0.08 mm (0.0032 in)
Drive axle runout limit 0.08 mm (0.0032 in)
Secondary shaft runout limit 0.12 mm (0.0047 in)
Secondary reduction ratio 6.034 (52/32 x 36/22 x 59/26)
Final drive Belt
Air filter
Air filter element Oil-coated paper element
V-belt filter element Dry element
Fuel pump
Pump type Electrical
Maximum consumption amperage 1.7 A
Fuel injector
Resistance 12.0

Throttle body
ID mark BC31 00
Throttle position sensor
Resistance 1.20–2.80 k

Accelerator position sensor
Resistance 1.08–2.52 k

Idling condition
Engine idling speed 1100–1300 r/min
O
2
feedback control Active
Exhaust gas sampling point Muffler tail pipe