manualshive.com logo in svg

Yamaha RY30, Authorized Product Manual

Share
Download
Yamaha RY30 Authorized Product Manual Download Page 98

VOICE EDIT MODE

actually three hi-hat voices (open and closed for

each) which are initially assigned to alternate
groups 1, 2, and 3.

It is also possible to create a muted triangle

voice, for example, by editing the normal tri-
angle’s envelope and filter parameters to pro-

duce a muted sound. If the normal and muted tri-
angle are then assigned to the same alternate
group, they can be used to produce a realistic

open-and-muted triangle effect.

OUTPUT ASSIGN 

Voice edit mode/Page 12

Notes: 

The various settings are as follows:

Summary: 

Assigns the selected voice to the

RY30’s stereo and individual outputs.

Settings: 

Voice: I00 . . . I95 (internal), C00 . . . C31

(card)

Output: STEREO, ST&INDV1, ST&INDV2,

INDV1,  INDV2, INDV1&2

Procedure: 

Use the and keys to move the

cursor to the voice name or output parameter,
then use the [INC] and [DEC] keys or the

[DATA] slider to set as required. The instru-

ment pads can be used to select the voice.

STEREO: 

The selected voice is output via the

stereo R and L/MONO OUTPUT jacks.

ST&IND V1: 

The selected voice is output via the

stereo R and L/MONO OUTPUT jacks 

and

the INDIV OUT 1 jack.

ST&INDV2: 

The 

selected voice is output via the

stereo R and L/MONO OUTPUT jacks 

and

the INDIV OUT 2 jack.

INDV1: 

The selected voice is output via the

INDIV OUT 1 jack.

INDV2: 

The selected voice is output via the

INDIV OUT 2 jack.

INDV1&2: 

The selected voice is output via both

the INDIV OUT 1 and 2 jacks.

INDIVIDUAL LEVEL 

Voice edit mode/Page 13

Summary: 

Sets the level at which the selected

voice will be output via the RY30’s individual
outputs when the voice is assigned to the
INDIV OUT 1 and/or 2 jacks using the OUTPUT
ASSIGN function described above.

90

Settings: 

Voice: I00 . . . I95 (internal), C00 . . . C31

(card)

Individual level: 00 . . . 63

Procedure: 

Use the and  keys to move the

cursor to the voice name or individual level
parameter, then use the [INC] and [DEC] keys

or the [DATA] slider to set as required. The
instrument pads can be used to select the voice.

Notes: 

The LEVEL function described on page 81

also affects the level of the signal sent to the
individual outputs.

Summary of Contents for RY30






























































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands