manualshive.com logo in svg

Yamaha RY30, Authorized Product Manual

Share
Download
Yamaha RY30 Authorized Product Manual Download Page 18

[STOP/CONTINUE] Key

Stops playback or recording. If you press the

[STOP/CONTINUE] key again after stopping a

pattern or song, playback will resume from the
point at which it was stopped. The [START] key
described above will always start the pattern or
song from the beginning.

[REC] Key

Engages record standby when the pattern mode
is selected. You can then select the desired pat-
tern record mode — real time, step, parameter
record, or clock move — via the [INC] and

[DEC] keys or [DATA] control, and start

recording by pressing the [START] key.

When the song mode is selected the [REC]

engages record or edit standby — you then
select record or edit via the [INC] and [DEC]
keys or [DATA] control, and start recording or
editing by pressing the [START key].

[PATTERN] Key

Selects the RY30 pattern mode, in which pat-
terns can be selected, played, recorded, or
modified.

[SONG] Key

Selects the RY30 song mode, in which songs
can be selected, played, recorded, and edited.

[UTILITY] Key

Selects the UTILITY mode which provides ac-
cess to all system, MIDI, cassette, and card
utility functions.

[TEMPO] Key

Moves the display cursor to the tempo param-
eter in the pattern or song modes, allowing the
tempo to be varied by using the [DATA] control,
the numeric keys, or the [INC] and [DEC] keys.
Press the [TEMPO] key again after the tempo
has been adjusted to return the cursor to its

previous position.

[PAD BANK] Key

Selects the pad bank mode in which the various

pad banks can be selected and re-programmed

(page 17, 97).

[VOICE EDIT] Key

Selects the voice edit mode in which any of the

RY30 voices can be edited to create instruments
ideally suit to your own musical needs (page 41,
79).

9

Summary of Contents for RY30






























































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands