Yamaha RY30 Authorized Product Manual Download Page 72

Page: 72 / 125

SONG MODE

SONG COPY

Song mode/Page 03

Summary:

Copies the song data from the specified

source song number to the specified destination
song number.

Settings:

Source song number: 00 . . . 19

Destination song number: 00 . . . 19

Procedure:

Use the and keys to move the

cursor to the source or destination song number.
Use the [INC] and [DEC] keys, the [DATA]
slider, or the numeric keys to set the appropriate
song numbers.

Press the [ENTER] key — “Sure” will

appear on the display. Press the [ENTER] key

again to copy the song or press [EXIT] to cancel
the operation. “Complete!” will appear on the
display briefly when the song has been copied.

Notes:

The ability to copy songs is particularly use-

ful when you want to create variations on exist-

ing songs. Copy the song you want to modify to a

new song number, then edit the song as described

on page 34.

Any previous data in the destination song number

will be erased and replaced by the copied song

data.

If you specify a source song that contains no

data, the “!No Data Converted!” error message

will appear on the display when the operation is

executed, and the operation will be cancelled.

‘‘! Memory Full !” will appear on the display if

there is not enough song memory available to

complete the operation.

CLEAR ALL SONGS

Song mode/Page 04

Summary:

Clears (erases) all songs.

Settings:

None

Procedure:

Press the [ENTER] key

—

“Sure” will

appear on the display. Press the [ENTER] key
again to clear the songs or press [EXIT] to can-

cel the operation. “Complete!” will appear on

the display briefly when the songs have been
cleared.

Notes:

This function wipes out all 20 songs at once,

so be sure there’s nothing you want to keep in

the song memory before you go ahead and

CLEAR ALL SONGS. For long-term storage you

can always store the data on cassette tape (see
the “CASSETTE SAVE,” “CASSETTE VER-
IFY,” and “CASSETTE LOAD” functions on

pages 69 and

70),

or dump the data to a MIDI

storage device using the “BULK TRANSMIT

function described on page

74.

Summary of Contents for RY30






























































































































Search results

Summary of Contents for RY30

Reviews:

Related manuals for RY30

Brands by name

Popular brands

Yamaha RY30, Authorized Product Manual

Search results

Summary of Contents for RY30

Reviews:

Related manuals for RY30

Brands by name

Popular brands