manualshive.com logo in svg

Yamaha RY30, Authorized Product Manual

Share
Download
Yamaha RY30 Authorized Product Manual Download Page 45

Insert

The insert job allows you to insert a new part 

— 

pattern, repeat, tempo change,

or velocity change 

— 

at any point in the song.

Use the [INC] and [DEC] keys, the [DATA] control, or the numeric keys to

select the part at which you want to insert a new event.

Press the [Enter] key. “Sure” will appear on the upper line of the display.

Confirm your intention to insert at the specified location by pressing the

[ENTER] key again. This actually executes the insert operation and

“Complete!” will appear on the display briefly when the operation is finished.

The RY30 will automatically return to the song edit mode.

Example:

Here’s what happens when you insert at part 3:

When the insert operation is executed the existing part 3 and all subsequent

parts are moved up, leaving space for a new part 3 which should be recorded

immediately after the insert operation is executed (while the TYPE and event

parameters are flashing).

36

Summary of Contents for RY30






























































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands