Yamaha RY30, Authorized Product Manual

Page: 66 / 125

PATTERN MODE
Procedure: Use the and keys to move the
cursor to the desired parameter (the ‘‘>” and
“<’’symbols at the ends of the display screens
indicate that more parameters can be accessed
by moving the cursor past the indicated end of
the current screen). Use the [INC] and [DEC]
keys, the [DATA] slider, or the numeric keys to
set the parameters as required. The instrument
pads can be used to select the voice.
Press the [ENTER] key — “Sure” will
appear on the display. Press the [ENTER] key
again to modify the parameter or press [EXIT]
to cancel the operation. “Complete!” will appear
on the display briefly when the parameter has
been modified.
Notes: This function makes it possible to modify the
sound of a voice within a pattern without actually
editing the voice.
The velocity value functions as an “offset”
from the standard setting of +32.
If you specify a pattern that does not contain
the selected voice, the “No Data Converted”
error message will appear on the display when
the operation is executed, and the operation will
be cancelled.
If the pattern size limit is exceeded, the
“!Too Large Pattern!” error message will
appear.
“! Memory Full !” will appear on the display
if there is not enough pattern memory available
to complete the operation.
JOB 06: SWING
58
Summary: Sets the amount of “swing” feel applied
to the specified voice of the specified pattern.
Settings: Source pattern number: 000 . . . 199
Voice: Any voice used in the pattern — I00 . . .
I95 (internal), C00 . . . C31 (card)
Clock: -11 . . . +11 (Quantization l/08),
- 5 . . .+5
(Quantization l/16)
Destination pattern number: 000 . . . 099
Procedure: Use the and keys to move the
cursor to the desired parameter (the ‘‘>” and
“<” symbols at the ends of the display screens
indicate that more parameters can be accessed
by moving the cursor past the indicated end of
the current screen). Use the [INC] and [DEC]
keys, the [DATA] slider, or the numeric keys to
set the parameters as required. The instrument
pads can be used to select the voice.
Press the [ENTER] key “Sure” will
appear on the display. Press the [ENTER] key
again to applied the specified swing parameters
and copy the resultant pattern, or press [EXIT]
to cancel the operation. “Complete!” will appear
on the display briefly when the swing operation
has finished.
Notes: If you specify
a
pattern that does not contain
the selected voice, the “!No Data Converted!”
error message will appear on the display when
the operation is executed, and the operation will
be cancelled.
If the pattern size limit is exceeded, the
“!Too Large Pattern!” error message will
appear.
“! Memory Full !” will appear on the display
if there is not enough pattern memory available
to complete the operation.