manualshive.com logo in svg

Yamaha RY30, Authorized Product Manual

Share
Download
Yamaha RY30 Authorized Product Manual Download Page 97

The “Rate” parameter determines how fast

the pitch sweeps from the normal pitch of the

voice to the pitch determined by the level

parameter. A setting of “63” produces the
fastest (almost instantaneous) sweep, while the

minimum setting of “00” produces no change.

Pitch EG

VOICE EDIT MODE

POLY ON/OFF 

Voice edit mode/Page 10

Summary: 

Turns polyphony on or off for the selected

voice.

Settings: 

Voice: I00 . . . I95 (internal), C00 . . . C31

(card)

Poly mode: ON/OFF

Procedure: 

Use the and keys to move the

cursor to the voice name or poly mode
parameter, then use the [INC] and [DEC] keys
or the [DATA] slider to set as required. The

instrument pads can be used to select the voice.

Notes: 

When the poly mode is turned “ON” for a

voice, that voice may be entered twice on the
same beat of a pattern. This produces a
“phased” effect with many voices that can be
quite interesting and useful. Another advantage
of polyphony is that it allows the same cymbal
sound to be played consecutively without cutting
off the tail end of the previous cymbal sound.

ALTERNATE GROUP 

Voice edit mode/Page 11

Summary: 

Turns alternate grouping for the selected

voice off, or assigns the voice to one of 7
“alternate” groups.
Specifies drum elements which may not sound at
the same time.

Settings: 

Voice: I00 . . . I95 (internal), C00 . . . C31

( c a r d )

Alternate group mode mode: OFF, 1 . . . 7

Procedure: 

Use the and keys to move the

cursor to the voice name or alternate group mode
parameter, then use the [INC] and [DEC] keys
or the [DATA] slider to set as required. The
instrument pads can be used to select the voice.

Notes: 

In a real drum set, you would never hear the

sound of a closed hi-hat at the same time as the
open hi-hat. If you assign both of these instru -
ments (which are really different sounds pro-
duced by the same instrument) to one of the 7
available alternate groups, the closed and open
hi-hat elements will not sound together even if

their keys are played at the same time. This also

means that you can play the open hi-hat, then

“close” the hi-hat before the open hi-hat sound

ends by playing the closed hi-hat key. The RY30

89

Summary of Contents for RY30






























































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands