manualshive.com logo in svg

Yamaha RY30, Authorized Product Manual

Share
Download
Yamaha RY30 Authorized Product Manual Download Page 71

SONG MODE

Song mode/Page 01

Summary: 

Selects a song number between 0 and 19

for playback, recording, or editing. 

This mode

also allows location of any specified measure or
part number.

Settings: 

Song name: see page 38

Tempo: see page 34
Song number: 00 . . . 21
Measure: 001 . . . 999

Part number:  00 1 . . . 999

Procedure: 

Use the and keys to move the

cursor to the song number, measure, or part

number parameter. Use the [INC] and [DEC]
keys, the [DATA] slider, or the numeric keys to

set the selected parameter.

The selected song can be played by pressing

the [START] key and stopped by pressing the
[STOP/CONTINUE] key. If you press the
[STOP/CONTINUE] key again after stopping
the song, playback will resume from the point at
which it was stopped. The [STOP/CONTINUE]
key will also start playback from a selected

measure or part location. The [START] key will

always start the song from the beginning.

Notes: 

More details on selecting and playing songs

are given in the TUTORIALS section, beginning

on page 32. For song recording procedures see

page 32. For editing procedures see page 34.

A small letter “w” appearing to the right of

the song number indicates that the pattern con-

tains data. Song numbers with no “w” are blank

or have been cleared using the SONG CLEAR

function described next.

Song numbers 20 and 21 are demo songs (see

page 16). These song numbers cannot be used for

recording.

Summary: 

Clears (erases) the selected song.

Settings: 

Song number: 00 . . . 19

Procedure: 

Use the [INC] and [DEC] keys, the

[DATA] slider, or the numeric keys to select the

song number to be cleared.

Press the [ENTER] key — “Sure” will

appear on the display. Press the [ENTER] key
again to clear the song or press [EXIT] to cancel
the operation. “Complete!” will appear on the
display briefly when the song has been cleared.

Notes: 

This is the main method you’ll use to get rid

of unwanted songs. It’s also handy to be able to

clear a song you’re working on if you don’t like

the way things are going and want to start again

from scratch.

If you attempt to clear a song that contains

no data, the “!No Data Converted!” error mes-

sage will appear on the display.

6 3

SONG SELECT

SONG CLEAR

Song mode/Page 02

Summary of Contents for RY30






























































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands