manualshive.com logo in svg

Yamaha RY30, Authorized Product Manual

Share
Download
Yamaha RY30 Authorized Product Manual Download Page 65

Press the [ENTER] key — “Sure” will

appear on the display. Press the [ENTER] key
again to change the voice or press [EXIT] to
cancel the operation. “Complete!” will appear on
the display briefly when the voice has been
changed.

Notes: 

This function makes it possible to exchange

one snare for another, for example, without hav-

ing to re-record the entire part.

If you specify, a pattern that does not contain

the selected voice, the “!No Data Converted!”

error message will appear on the display when

the operation is executed, and the operation will

be cancelled.

JOB 04: PATTERN PARAMETER COPY

JOB 05: PATTERN PARAMETER MODIFY

Summary: 

Copies the specified parameter (or all

parameters) from the selected source voice to

the specified voice in the destination pattern if
the destination voice occurs at the same timing

as the source voice.

Settings: 

Source pattern number: 000 . . . 199

Source voice: Any voice used in the source pat

tern —  I00  . . .  I95 (internal), C00 . . . C31
(card)

Parameter: VELOCITY, PITCH, DECAY, PAN,

FILTER, BALANCE, ALL

Destination  pattern number: 000 . . . 099
Destination voice: Any voice used in the desti

nation pattern  — I00 . . . I95 (internal), C00
. . . C31 (card)

Procedure: 

Use the and keys to move the

cursor to the desired parameter (the “>” and

“<’’symbols at the ends of the display screens
indicate that more parameters can be accessed
by moving the cursor past the indicated end of
the current screen). Use the [INC] and [DEC]

PATTERN MODE

keys, the [DATA] slider, or the numeric keys to
set the parameters as required. The instrument
pads can be used to select the source and desti-
nation voices.

Press the [ENTER] key — “Sure” will

appear on the display. Press the [ENTER] key
again to copy the parameter or press [EXIT] to
cancel the operation. “Complete!” will appear on
the display briefly when the parameter has been
copied.

Notes: 

If you specify a source pattern that does not

contain the selected voice, the “No Data Con-

verted” error message will appear on the display

when the operation is executed, and the opera-

tion will be cancelled.

If the pattern size limit is exceeded, the

“!Too Large Pattern!” error message will

appear.

“! Memory Full !” will appear on the display

if there is not enough pattern memory available

to complete the operation.

Summary: 

Allows the value of the specified

parameter of the selected voice in any pattern to

be modified.

Settings: 

Pattern number: 000 . . . 099

Voice: Any voice used in the pattern — I00 . . .

I95 (internal), C00 . . . C31 (card)

Parameter: VELOCITY, PITCH, DECAY, PAN,

FILTER, BALANCE

Ratio: 000 . . . 200%

Offset: VELOCITY........ -32 . . . +31

DECAY ............. -63 . . . +63
PAN .................. -32 . . . +32
PITCH ............... -60 . . . +60
FILTER .............. -63 . . . +63
BALANCE ......... -63 . . . +63

57

Summary of Contents for RY30






























































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands