Yamaha RX10RTW, Supplementary Service Manual

Page: 97 / 163

SPEC
52
NOTE:
Tightening steps:
1. Tighten the bolt to a torque at 120 Nm (12.0 m•kg, 85 ft•lb).
2. Loosen the bolt completely.
3. Retighten the bolt to a torque of 60 Nm (6.0 m•kg, 43 ft•lb).
Parts to be tightened
Tightening torque
Remarks
Nm m•kg ft•lb
(RXW10GTW)
Front pivot arm and frame
60 6.0 43
Front pivot arm and shockabsorber 49 4.9 35
Front pivot arm and stopper band 4 0.4 2.9
Shaft and stopper band 4 0.4 2.9
Sliding runner and sliding frame 10 1.0 7.2
Suspension wheel and sliding frame 60 6.0 43
Front pivot arm and control rod 74 7.4 53
Front pivot arm bracket and sliding frame 30 3.0 22
Front pivot arm and bracket 72 7.2 52
Rear pivot arm and shockabsorber 49 4.9 35
Rear pivot arm bracket and control rod 74 7.4 53 Apply LOCTITE
®
Rear pivot arm and frame 84 8.4 61 Apply LOCTITE
®
Shaft and frame 84 8.4 61 Apply LOCTITE
®
Rear pivot arm and rear pivot arm bracket 72 7.2 52 Apply LOCTITE
®
Rear pivot arm bracket and sliding frame 72 7.2 52
Rear axle 75 7.5 54
(RX10RTW, RX10RTRW, RX10MSW)
Front pivot arm and frame
72 7.2 52
Front pivot arm and front shockabsorber 49 4.9 35
Front pivot arm and stopper band 4 0.4 2.9
Shaft and stopper band 4 0.4 2.9
Shaft and sliding frame 60 6.0 43
Suspension wheel assembly and sliding frame 60 6.0 43
Front pivot arm and sliding frame 60 6.0 43
Suspension wheel and sliding frame 60 6.0 43
Rear pivot arm and sliding frame 72 7.2 52
Bracket and front shockabsorber 49 4.9 35
Front pivot arm bracket and bracket 72 7.2 52
Front pivot arm and bracket 72 7.2 52
Bracket and rear shockabsorber 49 4.9 35
Relay rod and rear pivot arm 49 4.9 35
Rear pivot arm and rear shockabsorber 49 4.9 35
Rear pivot arm and frame 72 7.2 52
Suspension wheel and sliding frame 60 6.0 43
Pivot shaft and sliding frame 72 7.2 52
Rear axle 75 7.5 54
Speed sensor 20 2.0 14
Gear unit (speed sensor) 40 4.0 29
TIGHTENING TORQUE