Yamaha NUAGE, Setup Manual

Page: 114 / 159

114
Outputs Tab
Next set the output channels. Start by creating a bus under the Outputs tab.
Tip:
The speaker configuration (5.1, stereo, etc) used for monitoring in the control room must be
defined under the Outputs tab as the main mix. Separately from the speakers (5.1, stereo, etc) added
under the Studio tab, create a bus under the Outputs tab, and set that as the main mix. By setting the
Audio Device and Device Port to "Not Connected," you can define a bus that has no physical
output. The orange icon indicates the current main mix. If 5.1-channel sound is not selected,
right-click on the bus name and choose "Set '5.1ch Speakers' as Main Mix."
Under the Outputs tab, do not set up the same device names and device ports that you did under the
Studio tab. There is a danger of unexpectedly loud volume from double-patching.