Yamaha NUAGE, Setup Manual

Page: 17 / 159

17
3-3. Installing Nuage I/O
Nuage I/O is a 19-inch rack-mount equipment in 2U. Please prepare enough rack space as necessary.
Nuage I/O has fan equipped on the rare panel, please install it to the machine room if there is noise
from the fan.
Set up UNIT ID
When using multiple Nuage I/Os, it is necessary to set the UNIT ID on each I/O in order. Please set
the UNIT ID with the rotary switch on the rear panel.
【
UNIT ID on Nuage I/O
】
3.4. Installing the computer and peripheral hardware
Powerful computers generate a lot of fan noise, which can affect your work in a control room or
studio where being quiet is required. Therefore, we recommend locating computers in the machine
rooms or other isolated spaces, to the extent that is possible. If setting up in an isolated spot is a
problem, we recommend setting it up in a distant spot, and that you use a sound-isolating rack.
TIPS：
When other devices such as R series are in use within the same workgroup, please make sure
not to use the same UNIT IDs of those devices and choose a unique ID.